crrc/internal/app/stc/index.go

package stc

import (
	"context"
	"fmt"
	"net"
	"pbx-api-gin/internal/app/stc/active"
	"pbx-api-gin/internal/app/stc/broadcast"
	msgdata "pbx-api-gin/internal/app/stc/data"
	"pbx-api-gin/internal/app/stc/socket"
	"pbx-api-gin/pkg/lfshook"
	"pbx-api-gin/pkg/utils"
	"sync"
	"syscall"

	"time"
)

func StartStcConnection(conn net.Conn, cab string) {
	lfshook.NewLogger().Infof("Connect to STC%s ", cab)

	var connMux sync.Mutex // 保护 conn 的读写
	var conn1 net.Conn
	var err error
	var logTag = 0

	for {
		// 尝试建立连接MC
		conn1, err = CreateConnection(cab)
		if err != nil || conn1 == nil {
			time.Sleep(2 * time.Second)
			//lfshook.NewLogger().Logger.Infof("===========Reconnecting====To Cab:%s=======", cab)
			continue
		}

		trainInfo := fmt.Sprintf("CabNumber %s", active.ActivedCab)
		//set connection log
		if logTag == 0 {
			utils.Logger.Printf("Train Information: %s, Message: Connection to Cab%s STC is up !", trainInfo, cab)
			logTag = 1
		}

		connMux.Lock()
		oldConn := conn
		if cab == "1" {
			socket.Conn = conn1
		} else {
			socket.Conn8 = conn1
		}
		connMux.Unlock()

		// 关闭旧连接（如果存在）
		if oldConn != nil {
			oldConn.Close()
			//lfshook.NewLogger().Logger.Infof("Closed previous connection")
		}

		// 使用 context 控制所有协程的生命周期
		ctx, cancel := context.WithCancel(context.Background())

		// 启动消息处理MC1
		go func() {
			defer func() {
				cancel() // 一旦任一协程退出，取消所有
			}()
			broadcast.HandleStcCmd(ctx, conn1) // 改造 HandleStcCmd 接收 ctx
		}()

		// 启动心跳MC1
		go func() {
			defer func() {
				cancel()
			}()
			Sendheartbeat(ctx, conn1) // 改造 Sendheartbeat 接收 ctx
		}()

		// 等待连接断开（监听连接状态）
		<-ctx.Done()

		// 连接已断开，清理
		cancel() // 确保所有 cancel 被调用
		conn1.Close()

		//set connection log
		if logTag == 1 {
			utils.Logger.Printf("Train Information: %s, Message: Connection to Cab%s STC is down !", trainInfo, cab)
			logTag = 0
		}

		//lfshook.NewLogger().Logger.Info("Reconnecting in 1 second...")
		time.Sleep(time.Second) // 重连前等待
	}
}

// 返回错误而不是终止程序
func CreateConnection(RemoteCab string) (net.Conn, error) {

	if RemoteCab == "1" { // connect to MC1
		//lfshook.NewLogger().Logger.Infof("========Connect Server MC1 IP:%s  :Port:%d", socket.RemoteAddr, socket.RemotePort)
		// 创建 Dialer
		if active.CabNum == "1" { //in cab1
			dialer := &net.Dialer{
				LocalAddr: &net.TCPAddr{IP: net.ParseIP("0.0.0.0"), Port: socket.LocalPort}, // 固定本地端口
				Control:   controlTCPConn,
				Timeout:   5 * time.Second,
			}

			DialAddr := fmt.Sprintf("%s:%d", socket.RemoteAddr, socket.RemotePort)
			conn, err := dialer.Dial("tcp", DialAddr)
			if err != nil {
				//lfshook.NewLogger().Logger.Infof("========Connect server err :%+v", err)
				return nil, err
			}
			lfshook.NewLogger().Logger.Infof("Connect success MC1:%s:%d", socket.RemoteAddr, socket.RemotePort)
			return conn, nil
		} else { //in cab 8
			dialer := &net.Dialer{
				LocalAddr: &net.TCPAddr{IP: net.ParseIP("0.0.0.0"), Port: socket.LocalPort8}, // 固定本地端口
				Control:   controlTCPConn,
				Timeout:   5 * time.Second,
			}

			DialAddr := fmt.Sprintf("%s:%d", socket.RemoteAddr, socket.RemotePort)
			conn, err := dialer.Dial("tcp", DialAddr)
			if err != nil {
				//lfshook.NewLogger().Logger.Infof("========Connect server err :%+v", err)
				return nil, err
			}
			lfshook.NewLogger().Logger.Infof("Connect success MC1:%s:%d", socket.RemoteAddr, socket.RemotePort)
			return conn, nil
		}
	} else { // connect to MC8
		//lfshook.NewLogger().Logger.Infof("========Connect server MC8 IP:%s  :Port:%d", socket.RemoteAddr8, socket.RemotePort)
		// 创建 Dialer
		if active.CabNum == "1" { //in cab1
			dialer := &net.Dialer{
				LocalAddr: &net.TCPAddr{IP: net.ParseIP("0.0.0.0"), Port: socket.LocalPort}, // 固定本地端口
				Control:   controlTCPConn,
				Timeout:   5 * time.Second,
			}

			DialAddr := fmt.Sprintf("%s:%d", socket.RemoteAddr8, socket.RemotePort)
			conn, err := dialer.Dial("tcp", DialAddr)
			if err != nil {
				//lfshook.NewLogger().Logger.Infof("========Connect server err :%+v", err)
				return nil, err
			}
			lfshook.NewLogger().Logger.Infof("Connect success MC8:%s:%d", socket.RemoteAddr8, socket.RemotePort)
			return conn, nil
		} else { //in cab 8
			dialer := &net.Dialer{
				LocalAddr: &net.TCPAddr{IP: net.ParseIP("0.0.0.0"), Port: socket.LocalPort8}, // 固定本地端口
				Control:   controlTCPConn,
				Timeout:   5 * time.Second,
			}

			DialAddr := fmt.Sprintf("%s:%d", socket.RemoteAddr8, socket.RemotePort)
			conn, err := dialer.Dial("tcp", DialAddr)
			if err != nil {
				//lfshook.NewLogger().Logger.Infof("========Connect server err :%+v", err)
				return nil, err
			}
			lfshook.NewLogger().Logger.Infof("Connect success MC8:%s:%d", socket.RemoteAddr8, socket.RemotePort)
			return conn, nil
		}
	}
}

/*
func StartConnectionToSipServer(conn net.Conn) {

	lfshook.NewLogger().Infof("Connect to Slave Sip Server ... ")
	var connMux sync.Mutex // 保护 conn 的读写
	var conn1 net.Conn
	var err error

	for {
		// 尝试建立连接MC
		conn1, err = CreateConnectionSipServer()
		if err != nil || conn1 == nil {
			time.Sleep(2 * time.Second)
			//lfshook.NewLogger().Logger.Infof("===========Reconnecting==Sip Server=======")
			continue
		}

		connMux.Lock()
		oldConn := conn

		socket.ConnToSlave = conn1

		connMux.Unlock()

		// 关闭旧连接（如果存在）
		if oldConn != nil {
			oldConn.Close()
			lfshook.NewLogger().Logger.Infof("Closed previous connection")
		}

		// 使用 context 控制所有协程的生命周期
		ctx, cancel := context.WithCancel(context.Background())

		// 启动心跳MC1
		go func() {
			defer func() {
				cancel()
			}()
			SendToRemoteMaster(ctx, conn1) // 改造 Sendheartbeat 接收 ctx
		}()

		// 等待连接断开（监听连接状态）
		<-ctx.Done()

		// 连接已断开，清理
		cancel() // 确保所有 cancel 被调用
		conn1.Close()

		lfshook.NewLogger().Logger.Info("Reconnecting in 1 second...")
		time.Sleep(time.Second) // 重连前等待
	}
}
*/
/*
// 连接Master sipserver
func CreateConnectionSipServer() (net.Conn, error) {
	dialer := &net.Dialer{
		LocalAddr: &net.TCPAddr{IP: net.ParseIP("0.0.0.0"), Port: socket.LocalServerPort}, // 固定本地端口
		Control:   controlTCPConn,
		Timeout:   5 * time.Second,
	}

	DialAddr := fmt.Sprintf("%s:%d", socket.RemoteAddr8, socket.LocalServerPort) // Connect to Cab8 Sip server
	conn, err := dialer.Dial("tcp", DialAddr)
	if err != nil {
		//lfshook.NewLogger().Logger.Infof("========Connect SIP server err :%+v", err)
		return nil, err
	}
	lfshook.NewLogger().Logger.Infof("Connect SIP Server success :%s:%d", socket.RemoteAddr, socket.LocalPort)
	return conn, nil
}*/

func controlTCPConn(network, address string, c syscall.RawConn) error {
	return c.Control(func(fd uintptr) {
		syscall.SetsockoptInt(int(fd), syscall.SOL_SOCKET, syscall.SO_REUSEADDR, 1)
		// 注意：SO_REUSEPORT 在某些系统可用（如 Linux），但非标准
	})
}

func Sendheartbeat(ctx context.Context, conn net.Conn) {
	var count uint8

	protocol := msgdata.NewProtocol()
	protocol.MessageID = 0x21
	protocol.DataLength = 0x04
	protocol.Data = make([]byte, 4)

	// 初始化协议...
	ticker := time.NewTicker(2 * time.Second)
	defer ticker.Stop()

	for {
		select {
		case <-ctx.Done():
			//lfshook.NewLogger().Logger.Infof("Sendheartbeat===ctx==ret======")
			return

		case <-ticker.C:
			count++
			protocol.Data[0] = count
			// 编码并发送数据...
			encoded, err := protocol.Encode()
			if err != nil {
				//fmt.Printf("encode err : %v\n", err)
				return
			}
			if conn != nil {
				_, err = conn.Write(encoded)
				if err != nil {
					//fmt.Printf("Send hearbeat err: %v\n", err)
					conn.Close()
					return // 触发重连
				}
				//lfshook.NewLogger().Logger.Infof("Sendheartbeat===send ======%x", encoded)
			}
		}
	}
}

/*
// cab == 8
func RecvFromSipServer() {

	lfshook.NewLogger().Infof("Connect to Master Sip Server  .... ")

	listener, err := net.Listen("tcp", "0.0.0.0:10000")
	if err != nil {
		lfshook.NewLogger().Logger.Infof("Sever Listen cab1 err:%+v", err)
	}
	defer listener.Close()

	for {
		conn, err := listener.Accept() //blocked wait connection
		if err != nil {
			lfshook.NewLogger().Logger.Infof("Sever accept cab1 err:%+v", err)
			continue
		}

		// 启动 goroutine 处理每个连接（支持并发）
		//go HandleConnection(conn)
		//clientAddr := conn.RemoteAddr().String()

		buf := make([]byte, 1024)
		for {
			n, err := conn.Read(buf)
			if n > 0 {
				//安全截取实际读到的字节
				//data := buf[:n]

				//Set master = true
				//if data[8] == 0x01 && data[5] == 0xf1 {
				//	active.Master = true
				//return // set to master , stop recv
				//} // else if data[8] == 0x00 && data[5] == 0xf1 {
				//active.Master = false
				//}
				//lfshook.NewLogger().Logger.Infof("Client  received %d bytes: hex=%x", n, data)

				//Respond to remote
				//if active.Master == true {
				if _, werr := conn.Write([]byte("1")); werr != nil {
					lfshook.NewLogger().Logger.Infof("Failed to write 'ok' to client: %+v", werr)
				}
				//} else {
				//	if _, werr := conn.Write([]byte("0")); werr != nil {
				//lfshook.NewLogger().Logger.Infof("Failed to write 'ok' to client: %+v", werr)
				//	}
				//}

			}

			if err == io.EOF {
				//lfshook.NewLogger().Logger.Infof("Client %s 连接正常关闭", clientAddr)
				break
			}
			if err != nil {
				// 忽略临时错误（如 timeout），但记录非临时错误
				if netErr, ok := err.(net.Error); ok && netErr.Timeout() {
					continue // 可选：超时后继续读（需配合 SetReadDeadline）
				}
				//lfshook.NewLogger().Logger.Infof("addr:%s read error: %+v", clientAddr, err)
				break
			}
		}
		lfshook.NewLogger().Logger.Infof("Connection closed from cab1 set Master = true !")
		active.Master = true
		//return
	}
}
*/
/*
func SendToRemoteMaster(ctx context.Context, conn net.Conn) {

	protocol := msgdata.NewProtocol()
	protocol.MessageID = 0xf1 //check master data type
	protocol.DataLength = 0x02
	protocol.Data = make([]byte, 2)

	// 初始化协议...
	ticker := time.NewTicker(2 * time.Second)
	defer ticker.Stop()

	for {
		select {
		case <-ctx.Done():
			return

		case <-ticker.C:

			//set master data
			//if active.Master {
			//protocol.Data[0] = 0 //set remote master false
			//} else {
			protocol.Data[0] = 1 //set remote master true
			//}

			// 编码并发送数据...
			encoded, err := protocol.Encode()
			if err != nil {

				return
			}

			conn.SetWriteDeadline(time.Now().Add(1000 * time.Millisecond)) //发送1秒超时
			if conn != nil {
				_, err = conn.Write(encoded)
				if err != nil {
					conn.Close()

					active.Master = true
					return // 触发重连
				}
			}

			conn.SetReadDeadline(time.Now().Add(1000 * time.Millisecond)) //接收1秒超时
			buf := make([]byte, 64)                                       // 足够接收短响应
			n, err := conn.Read(buf)
			if err != nil {
				if netErr, ok := err.(net.Error); ok && netErr.Timeout() {
					lfshook.NewLogger().Logger.Infof("Read timeout waiting for remote response — may be OK (no response expected?)")
				} else if errors.Is(err, io.EOF) || strings.Contains(err.Error(), "broken pipe") {
					lfshook.NewLogger().Logger.Infof("Remote closed connection during read: %+v", err)
					conn.Close()
					return
				} else {
					lfshook.NewLogger().Logger.Infof("Read from remote failed unexpectedly: %+v", err)
				}
				active.Master = true
				continue // 不中断循环，继续下一轮
			}

			//respond ok
			if n > 0 {
				continue
				//response := strings.TrimSpace(string(buf[:n]))
				//lfshook.NewLogger().Logger.Infof("Remote responded: [%s]", response)
				//可选：校验响应，例如
				//if response == "1" {
				//	active.Master = false

				//	if utils.CheckAsterisk() { //check asterisk available then stop asterisk
				//		utils.ExecCmd("/etc/init.d/asterisk", "stop", "PBX")
				//	}
				//}
			}
		}
	}
}
*/